Safety Clamps

MP Multi-Purpose Safety Clamp(Varco Type)

MP Multi-Purpose Safety Clamp(Varco Type)The MP Multi-Purpose Safety Clamp provides safe handling of all types of flush joint pipe, liners, and drill collars during make-up, break-out and setting through the rotary table. The MP Clamp can act as a shoulder elevator,if needed,or fitted with with lifting eyes to handle large diameter pipe. This versatile tools can also be inverted and fitted with holdown lugs for use in all types of snubbing operations. For maximum durability and long life in the field, interchangeable handles, liffting eyes and holdown lugs are forged, heat-treated steel.

 

Technical Specifications
Model Range (inches) P/N Qty
Links Gripping Dies lb kg
MP-S 2 7/8''-4 1/8'' 33030 7 8 83 37.5
4''-5'' 33031 8 9 91 41
MP-R 4 1/2''- 5 5/8''  33011 7 8 81 37
5 1/2''-7''  33012 8 9 89 40
6 3/4''-8 1/4''  33013 9 10 97 44
8''-9 1/4''  33014 10 11 105 47.5
9 1/4''-10 1/2''  33015 11 12 113 51
MP-M 10 1/2''-11 1/2''  33016 12 13 121 55
11 1/2''-12 1/2''  33017 13 14 129 58.5
12 1/2''-13 5/8''  33018 14 15 137 62
13 5/8''-14 3/4''  33019 15 16 145 66
14 3/4''-15 7/8''  33020 16 17 153 69.9
MP-L 15 7/8''-17''  33021 17 18 173 78.5
17''-18 1/2''  33022 18 19 181 82
18 1/8''-19 3/8''  33023 19 20 189 86
MP-XL 19 3/8''-20 3/8''  33024 19 20 196 89
20 3/8''-21 1/2'' 33025 20 21 204 92.5
21''-22 5/8''  33032 21 22 212 96
22 5/8''-23 3/4''  33033 22 23 220 100
23 3/4''-24 7/8''  33034 23 24 228 103.5
24 7/8''-26''  33035 24 25 236 107
26''- 27 1/8''  33036 25 26 244 110.5
29 3/8''-30 1/2''  33039 28 29 336 152.5

Baash Ross Type Safety Clamp

Baash Ross Type Safety ClampType T Safety Clamp is designed for small diameter pipe 1 1/8 thru 4 1/2 inch OD. Each link changes the effective working rang approximately 1 inch in diameter. For size larger than 4 1/2 inch OD, the Type C Safety Clamp should be used.

 

Total No. links required per range Range OD Size P/N
From To
4 1 1/8 2 7624-5044
5 2 1/8 3 1/4 7624-5045
6 3 1/4 4 1/2 7624-5046

Type T Safety Clamp Parts

Item No. Item No. REQ'D P/N
1 Link Assy, complete As ordered 7624-B-7
2 Link, Intermediate 1 7624-A-18
3 Slip with Cotter 1 7624-A-21
3A Cotter, for slips (1/4") 1 900620-52
4 Slip Spring 1 7624-B-21
5* Link pin with cotter 1 7624-C-5
5A" Cotter, for link (3/16") 1 900620-36
6 End link (Screw) 1 7624-A-20
7 End link (Pivot Block) 1 7624-A-19
8* End link pin with Chain 1 7624-F-5
9* Screw 1 7624-A-5
10* Nut 1 7624-B-5
11* Nut wrench 1 7624-A-25
12* Pivot Block 1 7624-A-5000
13* Pivot Block Pin 2 7624-D-5
14* Pivot Block pin wrench 1 900533-12
15* Handle 1 7624-A-6
16* Handle link pin w/ Cotter 2 7624-G-5
25* Equipment Box 1 7624-A-9
* These parts are interchangeable with the T type Clamps.

Type C Safety Clamp (Baash Ross)

Type C Safety Clamp (Baash Ross)

Total No links Range OD sizes P/N
From To
Type CR (Single Screw)
7* 3 3/4 4 5/8 7624-5007
8 4 1/2 5 5/8 7624-5008
9 5 1/2 6 5/8 7624-5009
10 6 1/2 7 5/8 7624-5010
11 7 1/2 8 5/8 7624-5011
12 8 1/2 9 5/8 7624-5012
13 9 1/2 10 5/8 7624-5013
Type CL (Single Screw)
14 10 1/2 11 5/8 7624-5014
15 11 1/2 12 5/8 7624-5015
16 12 1/2 13 5/8 7624-5016
17 13 1/2 14 5/8 7624-5017
18 14 1/2 15 5/8 7624-5018
Type CXL (Double Screw)
18 15 1/2 17 7624-5029
19 16 1/2 18 7624-5030
20 17 1/2 19 7624-5031
21 18 1/2 20 7624-5032
22 19 1/2 21 7624-5033
*7-Slip clamp on y, carries one handle; all other type CR and CL clamps with handles carry two handles, except CXL, which carries four handles per complete clamp.

Type C Safety Clamp Parts

Item No. Item No REQ'D P/N
1  Link Assy complete As ordered 7624-A-7
2 Link Intermediate 1 7624-A-1
3 Slip with Cotter 1 7624-A4
3A Cotter for slip (5/16") 1 90062-65
4 Slip Spring 1 7624-E-5
5 Link pin with Cotter 1 7624-C-5
5A Cotter for link pin (3/16") 1 900620-36
6 End Link (Screw) * 7624-A-3
7 End link (Pivot Block) * 7624-A-24
8 End link Pin with Chain * 7624-F-5
9 Screw * 7624-A-5
10 Nut * 7624-B-5
11 Nut wrench * 7624-A-25
12 Pivot block * 7624-A-5000
13 Pivot Block Pin ** 7624-D-5
14 Pivot Block pin Wrench 1 900533-12
15 Handle As ordered 7624-A-6
16 Handle link pin with cotter As ordered 7624-G-5
17 Hold Down ear complete 2 7624-26
18 Hold Down ear, only 2 7624-A-13
19 Pins with nuts and cotter 4 7624-B-13
20 Eye Bolt 2 7624-30A
21 Cap Screw 2 7624-30B
22 Lifting clevis, complete 2 7624-29
23 Lifting clevis, only 2 7624-A-29
24 Pins with nuts and cotters 4 7624-A-30
25 Equipment Box 1 7624-A-9
* One required on Type CR and CL, two required on type CXL
** Two required on type CR and CL, four required on type CXL